Tailpipe Tips

                                                                                                                         

888-465-7260

   

Our Tips are of the highest quality chrome and 304 Stainless.  They will give long lasting service and compliment your exhaust with a great appearance.  All tips can be welded, clamped or attached otherwise.  Part Numbers below where the 3rd letter is a S indicates the tip is Stainless; with a C indicates Chrome.

 

 

 

 

 

 

 

 

 

 

 

Chevelle Tips, GTO Splitters, Olds 442 Trumpets and many more tips

Photo #1 - 2.5' X 9" Pencil Tips  TTS252509R

Photo #2 - 2.5" x 9" Angle cut, slips over 2.5" tubing  TTC252509A

Photo #3  - 2.5" x 9" Turn down,  slips over 2.5' Tubing   TTC252509TD

Photo #4  -  3.5" x 12" Straight Cut,  slips over 3" tubing  TTS353012S - TTC353012S

Photo #5  -- 3.5" x 12" Angle Cut, Slips over 3" tubing  TTS353012A - TTC353012A

Photo #6 -- 3.5" x 18" Angle cut, slips over 2.5" Tubing  TTS352518A

Photo #7  -- 3.5" x 12" Rolled Angle, slips over 3" tubing  TTS353012AR

Photo #8  -- 3.5" x 18" Rolled Angle,  slips over 2.5" tubing  TTS352518AR

Photo #9 -- 3.5" x 12" Pencil Rolled Tip, slips on 3" tubing TTC353012R

 

Photo #10 -- 3.5" x 12" Straight cut, slips over 3.5" tubing....TTC353512S           3"x 9" slips over 3" tubing... TTS303009S     2½" x 9" slips over 3½" tubing TTS252509S

Photo #11 -- 3.5" x 12" Turn Down, slips over 3.5" tubing  TTC353512TD

 

Photo #12 -- 3" x 8" Inside Roll, slips over 2.5" tubing  TTC302508R

 

Photo #13 -- Twin Tips - Twin Angles, slips over 2.5" or 3" tubing       TTC252512 splitter - TTC302512 splitter

Photo #14 -- 3.5" x 12" Rolled Angle, slips over 2.5" tubing  TTS352512AR

Photo #15 -- 3.5" x 18" Angle cut, slips over 3.5" tubing  TTC353518A

Photo #16 -- 3" x 12" Trumpets    slips over  3"  TTS30olds  slips over 2.5"  TTS25olds

Photo #17 -- Chevelle Tip Slips over 2.5" or 3" tubing.   TTS30Ch (slips over 3"); TTS25Ch (Slips over 2.5")

  Stainless Steel U-Bolt or Band Clamps can be used to install most of these tips.  They cannot be used with tips such as in photos 6, 8, 12 & 14.  Clamps cannot be used with tips where only the very beginning of the tip comes in contact with the tubing.  There is just not enough room for effective clamping.
    

 

STAINLESS TIPS Part Number Size - Length Slips Over See Figure Above Price Each Use With
Pencil (Rolled) TTS252509R 2 3/8"" x 9" 2.5" 1 Avail in quantities of 12 only - Click here GM A, B, F, G
Straight cut TTS353012S 3.5" x 12" 3" 4 $50 GM A, F
  TTS303009S 3" x 9" 3" 10 $35 GM A, B, F, G
  TTS252509S 2.5" x 9" 2.5" 10 $28 GM A, B, F, G
Angle cut TTS353012A 3.5" x 12" 3" 5 Avail in quantities of 6 only - Click here GM A, F
  TTS352518A 3.5" x 12" 2.5" 6 Avail in quantities of 6 only - Click here GM A, F
Trumpet Tips TTS30olds 3" x 12" 3" 16 $60 GM A, F
  TTS25olds 2.5" x 12" 2.5" 16 $60 GM A, F
Rolled Angle TTS352512AR 3.5" x 12" 3" 14 $52 GM A, F
  TTS352518AR 3.5" x 12" 2.5" 8 Avail in quantities of 6 only - Click here GM A, F
Chevelle Tips TTS30Ch 3" x 9" 3" 17 $58 GM A, F, G
  TTS25Ch 2.5" x 9" 2.5" 17 $58 GM A, F, G
CHROME TIPS Part Number Size - Length Slips Over See Figure Above Price Each Use With
Pencil (Rolled) TTC252509R 2 5/8" x 9" 2.5" 1 $15 GM A, B, F, G
  TCC353012R 3.5" x 12" 3" 9 Avail in quantities of 6 only - Click here GM A, F
  TTC353012S 3.5" x 12" 3" 4 $28 GM A, B, F
  TTC353512S 3.5" x 12" 3.5" 10 $28 GM A, B, F, G
Turn Downs TTC252509TD 2 5/8" x 9" 2.5" 3 $14 GM, A. B. F. G
  TTC353512TD 3.5" x 12" 3.5" 11 $33 GM A, B, F, G
Angle Cut TTC252509A 2 5/8" x 9" 2.5" 2 $14 GM A, F
  TTC353012A 3.5" x 12" 3" 5 $28 GM A, F
  TTC353518A 3.5" x 18" 3.5" 15 $33 GM A, F
Rolled Angle TTC353012AR 3.5" x 12" 3" 7 $31 GM A, F
Twin Tips - Splitter TTC252512SP 2 5/8" x 12" 2.5" 13 $45 GM A, B, F, G
  TTC302512SP 2 5/8" x 12" 3" 13 $45 GM A, B, F, G
Inside Rolls TTC302508R 3" x 8" 2.5" 12 Avail in quantities of 24 only - Click here GM A, F
   TTC303006S 3" x 6" 3"   $26 Straight Cut End
  TTC353506S 3.5" x 6" 3.5"   n/a Straight Cut End
             

Dealers and Muffler Shops ----  If you are interested in quantity purchasing of any of the above Tailpipe Tips, then go here!

 

  Question? or Request our Catalog                           See Links Below

(Please give vehicle, engine and year & any other pertinent info so we can answer your question and send the correct information)

      "All performance exhaust products for pollution controlled vehicles are intended for off-road or drag strip use only"


Copyright © 2002-2010,   Torque Tech & Co., Inc.  All rights reserved.

This page last updated:  06/12/2010     Hit Counter