GM B-Body Cat-Back Dual Systems
GM B-Body Cat-Back Dual Systems
888-465-7260
| Please visit our new site: http://www.torquetech.intuitwebsites.com/index.html |
| For the time being --- copy and
paste the new address in your browser address area at the top.
www.torquetech.intuitwebsites.com/index.html
|
3" 94-96 Impala SS / Caprice / Wagon
The 3" Cat-Back Kit will bolt to the stock setup. Complete with all clamps and hangers. Comes with stock looking stainless steel tips. No resonators. Exits in stock location. Although not shown, kit includes a balance tube. This will help give a deep exhaust tone. All clamps are zinc coated as well as any nuts, bolts and washes being stainless. Tubing is 3" mandrel bent 16 gauge aluminized steel. Really nice and impressive with 3" stainless steel tips. Great sound! This vehicle is stock otherwise and is now able to "break loose" the wide rear tires on pavement. The performance gain should probably be in the 5 - 10 horse range. Mufflers being shown are the Ultra Flow Race Magnums/14". See below for muffler applications.
2.5" 94-96 Impala SS / Caprice / Wagon
This kit is basically the same as the 3" kit above except it does have resonators. This kit is sold only with the 2.5" Walker Ultra Flow Race Magnum/14" mufflers which incorporate the hangers on the end of these mufflers. No other mufflers can be substituted at this time. Complete kit has SS Tips along with resonators. This is a quality kit.
| 3" Kit | |||
| GMB30501 w/ Stainless Tips | n/a | ||
| 2½" Kit | |||
| GMB25501 w/ Stainless Tips & Resonators | $668 | ||
(Please give vehicle, engine and year & any other pertinent info so we can answer your question and send the correct information)
"All performance
exhaust products for pollution controlled vehicles are intended for off-road or
drag strip use only"
Copyright © 2002-2010, Torque Tech & Co., Inc. All rights reserved.
This page last
updated:
10/17/2011