Flanges
Flanges
888-465-7260
We are currently re-doing our site. Most of the main site is up on another location
right now. We appreciate your patience. Anything that is missing, please call.
| Come visit our New Site: http://www.torquetech.intuitwebsites.com/index.html |
| Please visit our new site: http://www.torquetech.intuitwebsites.com/index.html |
| For the time being --- copy and
paste the new address in your browser address area at the top.
www.torquetech.intuitwebsites.com/index.html
|
Torque Tech Performance Exhaust
CATALYTIC CONVERTER MOUNTING FLANGES
The following are standard 4-Bolt Flanges. Flanges are Plasma Cut for a
smooth cut. Gaskets are not needed.
| 2.5" Opening | FLA4B25 | $ 23.50 ea |
| 3" Opening | FLA4B30 | |
| 4" x 3" Oval Opening | FLA4B30A |
COLLECTOR FLANGES
The following are stand 3-Bolt Flanges commonly found on most all headers.
| 2.5" | FLACF25 | $8.00 ea |
| 3" | FLACF30 | |
| 3.5" | FLACF35 |
FORMED FLANGES
The same flanges used when mounting
downpipes to exhaust manifolds. They are called "formed" flanges because the inside part "conforms" to the shape of the flared pipe that mounts to the manifold
exit. These are for 2.5" pipe with a 2.5" bolt pattern. The bolt holes on the 3-Bolt flange are equidistant apart.
| (FLAF2502B) 2-Bolt Flange ................ only $ 3.95 |
| (FLAF2503B) 3-Bolt Flange ................ only $ 6.95 |
(Please give vehicle, engine and year & any other pertinent info so we can answer your question and send the correct information)
"All performance
exhaust products for pollution controlled vehicles are intended for off-road or
drag strip use only"
Copyright © 2002-2010, Torque Tech & Co., Inc. All rights reserved.
This page last
updated:
10/17/2011