Elbows & Pipe Reducers
We are currently re-doing our site. Most of the main site is up on another location
right now. We appreciate your patience. Anything that is missing, please call.
| Come visit our New Site: http://www.torquetech.intuitwebsites.com/index.html |
| Please visit our new site: http://www.torquetech.intuitwebsites.com/index.html |
| For the time being --- copy and
paste the new address in your browser address area at the top.
www.torquetech.intuitwebsites.com/index.html
|
Torque Tech Performance Exhaust
Flowmaster Mufflers |
| Best Deals in the Country! |
888-465-7260
Elbows & Pipe Reducers
All tubing we sell is Mandrel Bent -- meaning no Kinks!, anywhere!
45 & 90 Degree Elbows
The following Elbows are aluminized and mandrel bent. These can be used to create your own tailpipes for applications which we do not yet have a system. This is done by purchasing these assorted bends and cutting and welding together. They can also be used to make downpipes coming off exhaust manifolds, along with a straight piece of pipe to reach back to our header system which usually begins at or just in front of the Tranny Crossmember
.|
Part # |
Dia. | A-B Length | Radius | Price |
| 90 Degree id/od | ||||
| ELB90ID2512 | 2.5" | 12 - 12 | 5 " | $26 ea |
| ELB90ID3008 | 3" | 8 - 8 | 6" | $29 ea |
| ELB90ID3012 | 3" | 12 - 12 | 5" | $29 ea |
| 90 Degree od/od | ||||
| ELB90OD2512 | 2.5" | 12 - 12 | 5 " | $29 ea |
| ELB90OD3008 | 3" | 10 - 10 | 6" | $29 ea |
| ELB90OD3007 | 3" | 12 - 12 | 5" | $29 ea |
| Part # | Dia. | A-B Length | Radius | Price |
| 45 Degree od/od | ||||
| ELB45ID2506 | 2.5" | 6 - 6 | 4 " | $25 ea |
| ELB45ID3007 | 3" | 7 - 7 | 6" | $25 ea |
| ELB45ID3508 | 3.5" | 8 - 8 | 7" | $25 ea |
| 45 Degree OD/OD | ||||
| ELB45OD2506 | 2.5" | 6 - 6 | 4 " | $25 ea |
| ELB45OD3007 | 3" | 7 - 7 | 6" | $25 ea |
| ELB45OD3508 | 3.5" | 8 - 8 | 7" | $29 ea |
| 30 Degree OD/OD | ||||
| ELB30OD3508 | 3.5" | 4 - 4 | 5" | $29 ea |
| ELB30OD3508 | 3.5" | 4 - 4 | 5" | $29 ea |
PIPE REDUCERS
(Aluminized)Used to change from one size pipe to another. These are not collector reducers! Don't forget clamps!
| Pipe Reducers | ||
| Size | Part # | Price |
| 3" ID x 2.5" ID | PIP3025IDID | $16 |
| 3" OD x 2.5" ID | PIP3025ODID | $16 |
| 3" ID x 2.5" OD | PIP3025IDOD | $16 |
| 3.5" ID x 3" OD | PIP3530IDID | $16 |
| 3.5" ID x 3" ID | PIP3530IDID | $16 |
| 3.5" OD x 3" ID | PIP3530ODID | $16 |
(Please give vehicle, engine and year & any other pertinent info so we can answer your question and send the correct information)
"All performance
exhaust products for pollution controlled vehicles are intended for off-road or
drag strip use only"
Copyright © 2002-2010, Torque Tech & Co., Inc. All rights reserved.
This page last updated:
10/17/2011