GM G-Body
"Super Systems"
to fit Header Applications
Contact Info:

Phone: (229) 242-0691

Office Hours:
      Monday - Friday
        9 am to 5 pm
             Eastern Time





All tubing is:
  • 16 ga US grade Aluminized Steel
  • Mandrel Bent
  • 'aluminized' throughout the metal, not just a surface coating
  • Long Term Value with US made


Super Systems -- Systems of a certain size with the Tailpipes being the next size smaller.  For example, a 3" system with 2.5" Tailpipes or a 3.5" system with 3" Tailpipes.


  • Malibu
  • Monte Carlo
  • El Camino
  • Buick Regal / Century
  • Olds Cutlass
  • GrandAm
  • Pontiac Grand Prix ------------------ All 1978-88

These Systems come with:
  • Traditional Balance Tube/H-Pipe
  • or, X-Pipe

Both Kits come with everything needed for installation; gaskets, clamps, gaskets, etc. - all except mufflers which are purchased separately.  Click here for mufflers

Kits with Balance Tube / H-Pipe:
These Kits come with Balance Tube/H-Pipe, Collector Reducers & Gaskets (3.5"x2.5", 3.5"x3", 3"x3" or 3"x 2.5"), Headpipes, Tailpipes and all clamps and hangers. 

(NOTE:  If you need "Slip-On" Collectors, they can be substituted; however sometimes, depending on header this can cause you to come up short lengthwise.  Please call to discuss.  ---------- If you need Ball & Socket Reducers, Call.)    Collector Reducers

Kits with X-Pipe:
These Kits come with the X-Pipe assembly instead of the Balance Tube / H-Pipe.  If you have 3.5" collectors, then you will have 3.5" tubing back to the X-Junction, then 3" tubing out the back of the Junction to the mufflers and tails.  However, IF you are ordering a 2.5" System, then it will be the same as described above, EXCEPT just before the muffler the system will reduce for 2.5" Muffs (or you can reduce after the Muffs IF you have room.

(NOTE:  If you have headers which require a 'Slip-On' type hookup; then you have to consider two alternatives:
  • Expand Forward Extension of X-Pipe Assembly to slip over header
  • Or, use Ball & Socket Setup

               
Choice of 2 Tailpipes:
  •   Monte SS - Out the Back        SS
  •   Behind the Wheel                  BW

Behind the Wheel = BW
Monte SS - Out the Back = SS
Mufflers Separate:  Click Here for Muffs

3" Monte SS Tails on El Camino
If the Tails show too much, paint them black - makes them appear to 'show not as much.'
3" Monte SS Tails
3" Behind the Wheel Tails on
Rich Cambell's Monte
3" Behind the Wheel Tailpipes
Performance, Fit, & Service -- All part of our products!
Add this page to your favorites.
Going Fast is Our Business!
* for upgrades click here

Stainless Clamp Upgrade

All the above Balance Tube Kits utilize 8 Clamps and the Kits with X-Pipes utilize 14 Clamps.  For those who wish to do some Clamp Upgrades to Stainless, Click here for more info.

Balance Tube Upgrade

Typically the non-X Pipe kits come with a Balance Tube.  It's basically a straight piece of tubing.  However, some might prefer to have a 2-Piece which can be pulled apart if necessary, then we have Kit B.  Click here for more info.


Want more details on the dimensions of the X?
Click Here.
email me
Mufflers to fit our Systems
Click Here
10% & 25% Off