GM G-Body Systems to fit
"Header" Applications
Email for a Quote:
torkertwo@torquetechexh.com

For the following and equivalent vehicles:
- Pontiac Grand Prix ------------------ All 1978-88
These Systems come with:
- Traditional Balance Tube/H-Pipe
Both Kits come with everything needed for installation; gaskets, clamps, gaskets, etc. - all except mufflers which are purchased separately. Click here for mufflers
Systems with Balance Tube / H-Pipe:
These Kits come with Balance Tube/H-Pipe, Collector Reducers & Gaskets (3.5"x2.5", 3.5"x3", 3"x3" or 3"x 2.5"), Headpipes, Tailpipes and all clamps and hangers.
(NOTE: If you need "Slip-On" Collectors, they can be substituted; however sometimes, depending on header this can cause you to come up short lengthwise. Please call to discuss. ---------- If you need Ball & Socket Reducers, Call.) Collector Reducers
Systems with X-Pipe:
These Kits come with the X-Pipe assembly instead of the Balance Tube / H-Pipe. If you have 3.5" collectors, then you will have 3.5" tubing back to the X-Junction, then 3" tubing out the back of the Junction to the mufflers and tails. However, IF you are ordering a 2.5" System, then it will be the same as described above, EXCEPT just before the muffler the system will reduce for 2.5" Muffs (or you can reduce after the Muffs IF you have room).
(NOTE: If you have headers which require a 'Slip-On' type hookup; then you have to consider two alternatives:
- Expand Forward Extension of X-Pipe Assembly to slip over header
- Or, use Ball & Socket Setup
Choice of 2 Tailpipes:
- Monte SS - Out the Back SS
Behind the Wheel = BW
Monte SS - Out the Back = SS
Mufflers listed work best with our systems for Fit & Performance!

3" Monte SS Tails on El Camino
If the Tails show too much, paint them black - makes them appear to 'show not as much.'
3" Behind the Wheel Tails on
Rich Cambell's Monte
3" Behind the Wheel Tailpipes
Performance, Fit, & Service -- All part of our products!
Going Fast is Our Business!
Stainless Clamp Upgrade
The above kits utilize HD Zince U-Bolts. Many customers prefer to Upgrade to Stainless Clamps.
Clamp Upgrades to Stainless. Click here for more info.
Balance Tube Upgrade
Typically each of the above kits comes with a Balance Tube/H-Pipe except those with X-Pipes. It's basically a straight piece of tubing. However, some might prefer to have a 2-Piece which can be pulled apart if necessary, which we refer to as Kit B. Click here for more info.
Make-a-DownPipe Kits - MaD Kits
For Shorty Header Applications where the headers exit up near the block much like a regular Manifold, we have what we call Make-a-DownPipe Kits. These kits enable one to make your own DownPipe utilizing mandrel bent elbows. See Make-a-DownPipe Kits for further info.
Contact Info:
Phone: (229) 242-0691
Office Hours:
Monday - Friday
9 am to 5 pm
Eastern Time
All tubing is:
- 16 ga US grade Aluminized Steel
- 'aluminized' throughout the metal, not just a surface coating
- Long Term Value with US made
Want more details on the dimensions of the X?
G-Body vehicles require a "Dual Hump" Crossmember.
Visit:
or Call: 330-753-5300 ask for Dave.
Mufflers to Match our Systems? Click