GM F-Body Systems to fit
Header Applications
Full Systems available with:
- H-Pipe / Balance Tube
- X-Pipe
The Kits Utilizing the Balance Tube/H-Pipe:
These Kits come with Balance Tube/H-Pipe, Collector Reducers & Gaskets (3.5"x2.5", 3.5"x3", 3"x3" or 3"x 2.5"), Headpipes, Tailpipes and all clamps and hangers.
(NOTE: If you need "Slip-On" Collectors, they can be substituted; however sometimes, depending on header this can cause you to come up short lengthwise. Please call to discuss. ---------- If you need Ball & Socket Reducers, Call.)
The Kits Utilizing the X-Pipe:
These kits come with everything needed for installation (less muffs). All clamps, hangers, flanges and gaskets are provided. If you have 3.5" collectors, then you will have 3.5" tubing back to the X-Junction, then 3" tubing out the back of the Junction to the mufflers and tails. However, IF you are ordering a 2.5" System, then it will be the same as described above, EXCEPT just before the muffler the system will reduce for 2.5" Muffs (or you can reduce after the Muffs IF you have room.
Choice of 2 Tailpipes: Out the Back or Behind the Wheel
Photo: Mark Milanese
Behind the Wheel Tails
1st & 2nd Generation (1st Gen does't have the brackets welded to the tailpipe.)
3" Passenger Side Tail on '78 Camaro
A-Body Rolling Chasis, but X-configuration is the same.
Performance, Fit, & Service -- All part of our products!
Going Fast is Our Business!
Kits for the following 2nd Generation vehicles:
Behind the Wheel = BW
Out the Back = OB
Kits for the following 1st Generation vehicles:
Behind the Wheel = BW
Out the Back = OB
Order Mufflers Separately; Click Here
Order these Upgrades; Click Here
Need a 3" System w/2.5" Tailpipes?
See Super Systems: Click Super System
We'd greatly appreciate it if you would let us know of any links not working.
Email Here
Want more details on the dimensions of the X?
Click Here.
Want more details on the dimensions of the X?
Click Here.
Need Mufflers that will fit our Systems? Click Here
Need Mufflers that will fit our Systems? Click Here
20% OFF
up to 20% OFF
We have only 2nd Gen Sytems left.
only with X-Pipes with 3.5" Collectors.
Nothing for 3" Collectors or for Dual (non-X) systems.
