Order Mufflers Separate:
Need a 3" System w/2.5" Tailpipes? See GM A-Body Super Systems. Click Here.
Stainless Clamp Upgrade
All the above kits utilize 8 Clamps for those who wish to do some Clamp Upgrades to Stainless.
Make-a-DownPipe Kits - MaD Kits
For applications not listed above, we have what we call
Make-a-DownPipe Kits. These kits enable one to make
your own DownPipe utilizing mandrel bent elbows.
We have Systems
A. with the traditional H-Pipe or Balance Tube
B. with the X-pipe Technology
The following are Systems with the H-Pipe/Balance Tube
These Kits come with Balance Tube/H-Pipe, Collector Reducers & Gaskets (3.5"x2.5", 3.5"x3", 3"x3" or 3"x 2.5"), Headpipes, Tailpipes and all clamps and hangers.
(NOTE: If you need "Slip-On" Collectors, they can be substituted; however sometimes, depending on header this can cause you to come up short lengthwise. Please call to discuss. ---------- If you need Ball & Socket Reducers, Call.)
All Tailpipes exit under the rear bumper.
Kits for the following vehicles:
*Systems with Straight Tailpipes are designed to be short of the bumper since tips will be used.
For more detail about the X-Pipe Layout
Or
To Purchase just the X-Pipe Kit (No Tailpipes)
GM A-Body Systems
for Header Applications
Contact Info:
Phone: (229) 242-0691
Office Hours:
Monday - Friday
9 am to 5 pm
Eastern Time
All tubing is:
- 16 ga US grade Aluminized Steel
- 'aluminized' throughout the metal, not just a surface coating
- Long Term Value with US made
Performance, Fit, & Service -- All part of our products!
-------------------------------------------------------
The following Kits utilize the X-Pipe
These kits come with everything needed for installation (less muffs). If you have 3.5" collectors, then you will have 3.5" tubing back to the X-Junction, then 3" tubing out the back of the Junction to the mufflers and tails. However, IF you are ordering a 2.5" System, then it will be the same as described above, EXCEPT just before the muffler the system will reduce for 2.5" Muffs (or you can reduce after the Muffs IF you have room.
All clamps, hangers, flanges and gaskets are provided. Muffs extra.
All Tailpipes exit under the rear bumper
Order Mufflers Separate:
Need a 3" System w/2.5" Tailpipes? See GM A-Body Super Systems. Click Here.
Stainless Clamp Upgrade
All the above kits utilize 8 Clamps for those who wish to do some Clamp Upgrades to Stainless.
Balance Tube Upgrade
Typically each of the above kits comes with a Balance Tube. It's basically a straight piece of tubing. However, some might prefer to have a 2-Piece whick can be pulled apart if necessary, then we have Kit B. Click here for more info.
Make-a-DownPipe Kits - MaD Kits
For applications not listed above, we have what we call
Make-a-DownPipe Kits. These kits enable one to make
your own DownPipe utilizing mandrel bent elbows.
* need a 3" System w/2.5" Tailpipes? See GM A-Body Super Systems. Click Here.
To make System Upgrades.......
. . . And we have these..........
Want more details on the dimensions of the X?
Want more details on the dimensions of the X?
Need Mufflers that will fit our Systems?
Need Mufflers that will fit our Systems?
Need Mufflers that will fit our Systems?
Need Mufflers that will fit our Systems?
Going Fast is Our Business!
Order Mufflers Separate:
Need a 3" System w/2.5" Tailpipes? See GM A-Body Super Systems. Click Here.
Stainless Clamp Upgrade
All the above kits utilize 8 Clamps for those who wish to do some Clamp Upgrades to Stainless.
Balance Tube Upgrade
Typically each of the above kits comes with a Balance Tube. It's basically a straight piece of tubing. However, some might prefer to have a 2-Piece whick can be pulled apart if necessary, then we have Kit B. Click here for more info.
Make-a-DownPipe Kits - MaD Kits
For applications not listed above, we have what we call
Make-a-DownPipe Kits. These kits enable one to make
your own DownPipe utilizing mandrel bent elbows.
Sorry,
All GM A-Body Complete Systems are no longer available. All sold out.
However, we do have X-Pipe kits available. ( Mufflers forward.)