2.5" Hi-Flow DownPipe Kits
Each kit comes with the DownPipes, Mounting Flanges and Clamps.
These kits will fit All GM A, F & G-Body vehicles.
Chevy Small Block GMXC25100 --------------- $ 122 $110
If you have an engine and there is no DownPipe Kit listed, we have what we call Make-a-DownPipe Kits (MaD). These consist of two elbows, two Manifold Hookups. For futher info, Click Here.
Performance, Fit, & Service -- All part of our products!
Email for a Quote: torkertwo@torquetechexh.com
Going Fast is Our Business!
Contact Info:
Phone: (229) 242-0691
Office Hours:
Monday - Friday
9 am to 5 pm
Eastern Time
All tubing is:
- 16 ga US grade Aluminized Steel
- 'aluminized' throughout the metal, not just a surface coating
- Long Term Value with US made
Photo by Joe Fisher - NY
Shows Driver Side Clearance on Olds 442. This is why Downpipe comes down off Exh Manifold and forward a little.
Olds 442 Drive Side Downpipe - Note Downpipe comes forward and it comes down, then makes the bend to go back. Same for Chevy BB.
Chevy Small Block Downpipes
The following kits include everything from the manifold to approximately the Transmission Crossmember. For Kits that take you all the way back to the muffler, go HERE.
Miscellaneous Downpipes --- 2.5" All are mandrel bent.
DP2501-17 & DP2502-17 2.5"
Photos to right give some detail. Click on the Thumb for enlargement.
These will mate to 2.25" and a little smaller manifold openings. In the enlargements you can see the ends have slight bends which you can use or cut off. Will fit many GM Manifolds.
Made of the same US grade Aluminized Steel we use for our systems.
DP2501-17
DP 2502-17 ---- $25 ea
Use 2 or 3 Bolt Mounting flanges listed below.
GMXB25R-22 2.5"
These photos indicate an angle of somewhere between 45 and 0 degrees.
These will mate to 2.25" and a little smaller manifold openings.
These have a slight bend on the ends which you can use or cut off. Will fit many GM Manifolds. Made of the same US grade Aluminized Steel we use for our systems.
GMXB25R-22 --- $25 ea
Use 2 or 3 Bolt Mounting flanges listed below.